To change the Wi-Fi network your Ring doorbell is connected to, follow these steps:
- Open the Ring app on your mobile phone and tap on the icon with three lines on the upper left corner of the app interface.
- Tap on Devices and choose the doorbell model that you have in your home.
- Tap on “Device Health” option and select “Change Wi-Fi Network”.
- From there, move to where the doorbell is located and then follow the instructions given on the screen to put the device in its set-up mode.
- Select the desired Wi-Fi connection, type in the network password and tap on the continue icon to save this setting. ..
To change the Wi-Fi network on the Ring doorbell, you also have to manually put it in the Set-Up mode. However, putting the Ring doorbell in Set-Up mode differs in each model and this should be done before using the Ring App. The orange button on the back of the Ring Video Doorbell, for instance, must be pressed after the doorbell has been removed from its mounting bracket. Also, for Ring Doorbell 2, 3 plus, and Elite, after removing the cover from the doorbell, press the black button in front of the doorbell. For Ring Doorbell Pro, you can press the button on the right side of the bell. When the doorbell is in its set up mode, there will be a spinning white light in front of your device.
Reasons Why You Might Change Your Wi-Fi Connection
If the Wi-Fi and ring doorbell keep disconnecting, it might be because of Wi-Fi network issues or a Wi-Fi error. This can lead to data loss and disconnection from live usage of the ring video doorbell. This could be due to a change in the password on the Wi-Fi router or maybe an issue with the Wi-Fi connection.
If the problem is with the router, you can check if it is working fine by running a quick check through the Ring app. You can then decide to reconnect the doorbell and Wi-Fi manually. When the Ring app has been launched, tap on the three lines located at the upper left and this will lead you to tap on Devices. Select the doorbell device you want to connect with the Wi-Fi network. Proceed to the Device Health at the lower part of the screen. Tap on “Reconnect” to establish connectivity of Wi-Fi network. This should restore doorbells connectivity to Wi-Fi network
Ring doorbells are all different in terms of their connection. For example, the Ring video doorbell and doorbell 2 only works with a Wi-Fi of 2.4GHz internet connection while Ring Doorbell 3, 3 plus, Elite, and Pro works with both 2.4GHz and 5 GHz. If the frequency is not up to the mark, it is expected that you get a new Wi-Fi to be able to make use of the doorbell fully.
Conclusion
If you are experiencing problems with your Wi-Fi connection and your doorbell, you can try to change the location of the Wi-Fi or try a different Wi-Fi network. If the problem persists, you can get help from technicians who can find a long-lasting solution to fix this error. ..
Wi-Fi is a common technology for connecting to the internet, and doorbells use it to send notifications when someone is coming or going.
This will allow you to receive push notifications, allow you to configure your device, give you access to video footage recording and give you access to live video stream of what happens in front of your door.
There may be a problem with the doorbell’s battery. Try replacing it. ..
If your doorbell is not entering the doorbell mode, you can do a hard reset by holding down the set up button for about 30s. Then wait for about 5 minutes for the doorbell to restart. Note that this will clear all previously saved settings and you have to set up again. ..
